Simulation Study of Gamma-Ray Attenuation in Glass, Concrete, and Aluminum Using XCOM Data

Main Article Content

Mohammed A. Ibrahim
Ali Mohammed salih
Ronak Ikram Ali

Abstract

In this study, Gamma ray attenuation in a number of common materials was investigated using simulation techniques. Mass attenuation coefficient for glass, concrete, and aluminum was obtained from the NIST XCOM at gamma ray energies (0.662) Mev and (1.25) Mev which correspond to (Cs-137) and (Co-60) radioactivate sources. Linear attenuation coefficient was calculated using the material densities, the intensity of transmitted radiation was determined by applying the Beer-Lambert law for different length of materials ranging from (0.5) cm to (5) cm. The results show that the attenuation of gamma rays increases with increasing thickness and density of the material, while higher photon energy leads to lower attenuation. Among the material studied, concrete showed the highest attenuation capacity due to its high density. These results confirm the effectiveness of simulation-based methods in evaluating radiation protection properties. It provides useful data for selection appropriate materials in radiation protection applications.

Article Details

How to Cite
Simulation Study of Gamma-Ray Attenuation in Glass, Concrete, and Aluminum Using XCOM Data. (2026). Journal of the College of Basic Education, 2(عدد خاص), 782-793. https://doi.org/10.35950/cbej.v2iعدد خاص.16185
Section
pure science articles

How to Cite

Simulation Study of Gamma-Ray Attenuation in Glass, Concrete, and Aluminum Using XCOM Data. (2026). Journal of the College of Basic Education, 2(عدد خاص), 782-793. https://doi.org/10.35950/cbej.v2iعدد خاص.16185